Oceanstor Dorado 5000 v6 Get Start and Manual

 oceanstor dorado 5000 v6 get start

https://support.huawei.com/enterprise/en/doc/EDOC1100194644/bfb91ed9/installation-tools

https://auth.scribd.com/u/signup?state=hKFo2SAxWUl0VlZ6YXBTU1dZdU9xNFZva2hUZG9TdjJ3cmk4MKFur3VuaXZlcnNhbC1sb2dpbqN0aWTZIEdaOUJJVWhCek5uZUN0d1kzdHZ0NFh1RTVPSFpINUJ5o2NpZNkgZ3ljN3lyZnpzdkpmaXd5bHNlYXU4Y3g5dVZhb2FOU1A&ui_locales=en

OceanStor Dorado 3000, Dorado 5000, and Dorado 6000 6.0.1 Quick Installation Guide

OceanStor Dorado 5000 Quick Installation Guide

***https://support.huawei.com/enterprise/en/doc/EDOC1100123476/ec11d091/logging-in-to-the-storage-system
https://support.huawei.com/enterprise/en/doc/EDOC1100123476/ec11d091/logging-in-to-the-storage-system

https://www.karma-group.ru/upload/iblock/65f/oceanstor-5000-6000-v5.pdf

***https://www.manualslib.com/manual/1473854/Huawei-Oceanstor-5300-V5.html?page=4#manual

***https://support.huawei.com/enterprise/en/doc/EDOC1100123476/ec11d091/logging-in-to-the-storage-system

    For a 2 U controller enclosure, the default IP addresses of the management network ports on controller A and controller B are 192.168.128.101 and 192.168.128.102, respectively. The default subnet mask is 255.255.0.0.
    For a 4 U controller enclosure, the default IP address of network port 0 on management module 0 is 192.168.128.101 and that of network port 0 on management module 1 is 192.168.128.102. The default subnet mask is 255.255.0.0.
    When a single controller enclosure is deployed, the default internal heartbeat IP addresses are 127.127.127.10 and 127.127.127.11 for a dual-controller storage system, and the subnet mask is 255.255.255.0; the default internal heartbeat IP addresses are 127.127.127.10, 127.127.127.11, 127.127.127.12, and 127.127.127.13 for a four-controller storage system, and the subnet mask is 255.255.255.0.

    When multiple controller enclosures are deployed, the default internal heartbeat IP addresses of each controller enclosure are the same as those when a single controller enclosure is deployed.
    The default IP address of the maintenance network port is 172.31.128.101 or 172.31.128.102, and the default subnet mask is 255.255.0.0.

After the controller enclosure is connected to the maintenance terminal using a serial cable, you can log in to the CLI of the storage device using a terminal program (such as PuTTY).